Product Features

• Four drilled and counterbored holes for 5/16 bolts in the base of the vise for bolting to a sine plate or the bed of a machine tool• 1/4-20 in tapped hole in provided in each side of the solid jaw to allow the use of a stop for repetitive operations• Ground flat, square and parallel within 0.0002 in• T-handle wrench is provided for tightening the movable jaw• Jaw pressure on workpiece is forward and downward for repeatable positioning and maximum holding power• The movable jaw is slightly narrower than the base, enabling the vise to be used on its side• For attaching special jaw plates, two holes are drilled in both the solid and movable jaws